Slant Six Forum
https://www.slantsix.org/forum/

my 61 lancer
https://www.slantsix.org/forum/viewtopic.php?t=28992		 Page 1 of 2
Author:  mightyss [ Sat May 17, 2008 2:33 pm ]
Post subject:  my 61 lancer
ok guys, i finally figured out to post pics!!!! here is my "new" 61 lancer project. heres a few shots, interior just got new carpet(check the am radio). motor pic showing split(homade duals), and my offy awaiting a new eddy 500cfm. motor needs detailed, interior is done, body work almost done, all trim @ bumpers off. almost ready for paint........ss

Image

Image

Image
Author:  SlantSixDan [ Sat May 17, 2008 3:00 pm ]
Post subject: 
Sharp!
Author:  mightyss [ Sat May 17, 2008 4:44 pm ]
Post subject: 
thnx dan, it wont be as nice as yours, but will be the only one in the shows around here. emsvitil, i like the straight axel look and the 70's look, hi@slow......not low@slow....lol
Author:  SlantSixDan [ Sat May 17, 2008 5:27 pm ]
Post subject: 
The slot mags really suit it.
Author:  mightyss [ Wed May 21, 2008 1:57 pm ]
Post subject:  new eddy 500
well, first off, let me say kudos to edelbrock!! i just got done mounting my new eddy 500, and so far...LOVE it.... i got the throttle linkage adapted(a few cuts and tweaks :) ), bolted it down, threw on a new filter, and it fired right up and idled beautifully(w/NO adjustments). i decided to drive it to the gas station(no bumpers, tailights mind you), and give her some premium. i got into it a couple of times to check the kickdown, and it works . i burned some rubber too :shock: (yes even w/those fattys on the rear!!), cant wait till i get an upgraded ignition and 4:10 gears w/sg(so i can sqwauk both fattys. :wink: .........ss

Image

Image
Author:  wvenable [ Wed May 21, 2008 2:18 pm ]
Post subject: 
Nicely done! :D
Author:  mightyss [ Sat May 31, 2008 5:54 am ]
Post subject:  Roller Paint Job Started......cool
update..... body work finished last weekend. i started the roller paint job yesterday. if any of you havent heard of this, see hotrod magazine's falcon , or moparts thread on this subject. the first coat looks pretty darn good, i think it may have been a little too thick because there were very few runs. second coat goes on today, i did not mask ANYTHING and did not not make a mess !! im using rustoleum satin black, and thinning w/oderless mineral spirits. i think i will sand every two coats because of the lack of major runs. this is more labor intensive, but carefull application will return nice results........cost for entire project :wink: -- $50 -- :wink: ...........ss
Author:  mightyss [ Sun Jun 08, 2008 3:24 pm ]
Post subject:  DONE...well, sort of..........
i put on 3 coats, and wet sanded once. then i used rubbing compound on entire car followed by a coat of cleaner wax. final results- not bad, my wet sanding sux, but its a rat rod, so considering the $50 price tag, im happy. also put my new caps on the slots. reinstalled all trim, bumpers, etc. i just drove it about 10 miles and back, gets lots-o-looks 8) . so i bought this car 2 months ago.....now interior done, body done, needs motor detailed, but a running and stopping(sort of) car...............check the pix.............ss

Image
now, thats a grill
Image
cranked the torsions bars a little more
Image spray bombed the wheel wells for a clean look
Author:  mightyss [ Sun Jun 08, 2008 3:26 pm ]
Post subject:  3 more pix
Image

Image

this shot will be looking better after i put on my chrome cover !!

Image
Author:  Reed [ Sun Jun 08, 2008 4:54 pm ]
Post subject: 
This car kicks ass. :twisted: 8)
Author:  mightyss [ Fri Jun 13, 2008 1:51 pm ]
Post subject:  more pics
Image
the" Piece de resistance " 8) need some chrome exhaust tips now!!!!!

Image
fattys, chrome, stance :wink:

Image
cleaned up the motor a little..needs some spray bombing...the steering box cleaned up nice... see the big "S"? :)
Author:  monkeybusiness [ Sun Jun 15, 2008 12:08 pm ]
Post subject: 
That is a nice ride. I like the wheel and tire combo ! The interior looks really bitchin' to !
Have you had the chance to drive it much with the four barrel ? Sounds like your happy with it so far, keep up the good work !
Author:  Dart270 [ Mon Jun 16, 2008 8:35 am ]
Post subject: 
Looks great! Keep it up.

Any chance we'll see you at Pittsburgh this coming weekend for the Slant Race? Greg and the boys will be putting on a nice feed and it should be a great time. Very nice folks and some cool cars coming. I'm driving up from Blacksburg, VA in my '68 Dart.

Lou
Author:  mightyss [ Mon Jun 16, 2008 12:39 pm ]
Post subject: 
mbiz.......ive havent driven it alot yet, but so far its running good w/4bl. ive no way to tell if the motor has had work, but i doubt it. 3.23 gears help it out of the hole, and i havent even tuned it or set valves, or changed from points to electronic ignition yet. Lou, this saturday morn my family and i will be leaving for wyoming for vacation, so i wont make the pa race. i would however like to be at the chrysler classic at norwalk in sept . the lancer needs brake work and a complete tune up before i would trust it to run down the track, or even drive that far.
Author:  Dart270 [ Mon Jun 16, 2008 3:21 pm ]
Post subject: 
OK, that's enough excuses for me. :wink: Just thought I'd drop that in...

Lou
Page 1 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/