hello,and welcome.
until you get yourself a manual,file this page away.
I think the one you want is the exhaust manifold nut,about half way down the page. a couple of clicks will enlarge it.
regards,Rod
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Intake/exhaust manifolds builts torque https://www.slantsix.org/forum/viewtopic.php?t=29505 |
Page 1 of 1 |
| Author: | Prince Valiant [ Fri Jun 13, 2008 9:13 pm ] |
| Post subject: | Intake/exhaust manifolds builts torque |
Hi, first of all i`d like to excuse my writings because i`m from Argentina and my english sucks. I`m new in the forum. So please be pacient. I need to know the intake & exhaust builts manifolds torque for a 3.6 lts. slant six, cuz' i´m changing the... (don´t know how its called) in spanish its "junta" thats between the manifolds and the cylinders top chamber. Really sorry my words, but i' promise get better. I hope you understanded me. Thanx a lot.- |
|
| Author: | walpolla [ Sat Jun 14, 2008 12:28 am ] |
| Post subject: | |
hello,and welcome. until you get yourself a manual,file this page away. I think the one you want is the exhaust manifold nut,about half way down the page. a couple of clicks will enlarge it. regards,Rod
|
|
| Author: | SlantSixDan [ Sat Jun 14, 2008 7:36 am ] |
| Post subject: | Re: Intake/exhaust manifolds builts torque |
Saludos amistosos y bienvenidos aqui, Prince Valiant! Tenemos varios amigos Argentino. Ver en particular argentina_slantsixer. Obviamente realmente no digo Español... Quote: I need to know the intake & exhaust builts manifolds torque for a 3.6 lts. slant six
Multiple-cabeza: 14 N•m exactamente y solamenteMultiple-multiple (3 cerrojos centro): 20 N•m (después que los multiple-cabeza han hecho aplicar su torsión) Quote: i´m changing the... (don´t know how its called) in spanish its "junta"
"Gasket" is the word.Quote: thats between the manifolds and the cylinders top chamber.
"Cylinder head".
|
|
| Author: | Prince Valiant [ Sat Jun 14, 2008 2:24 pm ] |
| Post subject: | |
Thanks a lot guys!!!! Really help me the manual-page walpolla. And thanks for the words dan!! I'm learning a lot on the forum. I'm getting the slant tomorrow with my brother and we'll see what we can do about that gasket (dan's courtesy word  ). I'll tell you how it was...Thanks again!!!! |
|
| Author: | 69a100 [ Sat Jun 14, 2008 3:35 pm ] |
| Post subject: | Re: Intake/exhaust manifolds builts torque |
Quote: Saludos amistosos y bienvenidos aqui, Prince Valiant! Tenemos varios amigos Argentino. Ver en particular argentina_slantsixer. Obviamente realmente no digo Español...
You da man, Never underestimate the power of Dan! Quote: I need to know the intake & exhaust builts manifolds torque for a 3.6 lts. slant six
Multiple-cabeza: 14 N•m exactamente y solamenteMultiple-multiple (3 cerrojos centro): 20 N•m (después que los multiple-cabeza han hecho aplicar su torsión) Quote: i´m changing the... (don´t know how its called) in spanish its "junta"
"Gasket" is the word.Quote: thats between the manifolds and the cylinders top chamber.
"Cylinder head".
|
|
| Author: | Prince Valiant [ Mon Jun 16, 2008 8:45 pm ] |
| Post subject: | |
Right on 69!! Well, tell you that the manifolds gasket is not a problem anymore. I succefully replaced it with my brother, but tell you that it was a teady job doing that on the cylinder head on his place. It was... heavy. Thanks for your help!!! But there's a new problem on the slant that we couldn't find. It doesn't start and it makes me out of mind!!  The problem seems to be an electric one, something about ignition that couldn't find. But i'm working on it.. let's see what i can do about it... Tell you later :shrug: |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|