| Slant Six Forum https://www.slantsix.org/forum/ |
|
| transmission lines https://www.slantsix.org/forum/viewtopic.php?t=30051 |
Page 1 of 1 |
| Author: | Russ [ Thu Jul 17, 2008 5:48 pm ] |
| Post subject: | transmission lines |
Hello, I was under the car the other day and noticed that the trans cooling lines that go to the radiator looked rather crusty and ancient. No doubt a current weak link. These are probably original, as everything else i have touched has been old and crusty. Oh well, but am I relegated to bending up my own lines, or are they available pre bent in the factory fashion? Lots of bends and dips during the path between the two components. Thanks. RC |
|
| Author: | Joshie225 [ Thu Jul 17, 2008 6:10 pm ] |
| Post subject: | |
Inline Tube |
|
| Author: | SlantSixDan [ Thu Jul 17, 2008 6:34 pm ] |
| Post subject: | |
Please see here. |
|
| Author: | Bren67Cuda904 [ Thu Jul 17, 2008 8:30 pm ] |
| Post subject: | |
http://tinyurl.com/24n55k I had some flexible Teflon stainless braided line made up to get over to the frame rail. This got the lines out of the way for the headers. They weren't cheap though. Around $80, but they'll take the heat. |
|
| Author: | SlantSixDan [ Thu Jul 17, 2008 9:41 pm ] |
| Post subject: | |
EXACTLY what I have in mind. Who made your teflon/stainless lines? |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|