hope this works!!! the pic is on my web site under intercooler page.
andrew wagner
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| pic of max's turbo *PIC* https://www.slantsix.org/forum/viewtopic.php?t=3077 |
Page 1 of 1 |
| Author: | andrew [ Mon Jan 07, 2002 5:45 pm ] |
| Post subject: | pic of max's turbo *PIC* |
hope this works!!! the pic is on my web site under intercooler page. andrew wagner
|
|
| Author: | andrew [ Mon Jan 07, 2002 5:50 pm ] |
| Post subject: | Re: pic of max's turbo( link to turbocharger on eb |
http://http://search.ebaymotors.com/search/search.dll?MfcISAPICommand=GetResult&siteid=100&s_partnerid=2&categorymap=0&query=turbocharger&SortProperty=MetaEndSort&ebaytag1=ebayreg |
|
| Author: | Doctor Dodge (Doug Dutra) [ Mon Jan 07, 2002 9:59 pm ] |
| Post subject: | Re: Ideas for max's turbo *PIC* |
Quote:
: hope this works!!! the pic is on my web site : under intercooler page. : andrew wagner Good job posting the PIC, (maybe we can get in there and resize it a little smaller, about 640 pixels wide fits well on this message board) I have done some of the 2.2 units on the SL6 and found that it is good to get the turbo out away from the driver's side engine mount and dipstick. I would also come forward as much as possible to clear the starter and have room for a different intake. (the Clifford intake swings more forward then the Offenhouser so leave some extra room) Below is a link to the turbo article. Turbos on Slants are a lot of work but give a lot of performance in return. DD SL6 Turbo Article 
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|