| Slant Six Forum https://www.slantsix.org/forum/ |
|
| super six set-up https://www.slantsix.org/forum/viewtopic.php?t=31002 |
Page 1 of 1 |
| Author: | NEGOC8R [ Tue Sep 09, 2008 5:11 pm ] |
| Post subject: | super six set-up |
could someone post pix on their super six set-up linkage in detail? i have the stuff, but i can't figure the linkage pieces. so i am looking for some pix that will show the attachments from the carburetor cable to the kickdown linkage rod, but not the linkage rod to the tranny. thanx so much! |
|
| Author: | ESP47 [ Tue Sep 09, 2008 6:08 pm ] |
| Post subject: | |
http://www.slantsix.org/forum/viewtopic ... highlight= |
|
| Author: | MiDi [ Tue Sep 09, 2008 7:45 pm ] |
| Post subject: | |
the frist image is a scan i made from my local dealers part books for the super six they where nice enough to let me take my laptop and scanner in there and go crazy. the next image i found some where it's all over the web it's prolly from here. i also have an orginal dealers part list of the parts if you want that p/m me. a few of us have used lokar cables for the kick down insted of the orginal parts.   neil parker - aka MiDi |
|
| Author: | MiDi [ Wed Sep 10, 2008 1:26 am ] |
| Post subject: | |
holy slantness! my setup is pictured in that thread! |
|
| Author: | NEGOC8R [ Thu Sep 11, 2008 12:01 am ] |
| Post subject: | setup |
THANX ALOT GUYS! MINE IS LIKE THE ILLUSTRATION. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|