| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Need NEW Rebuild Piston Recomend? https://www.slantsix.org/forum/viewtopic.php?t=31245 |
Page 1 of 1 |
| Author: | 69a100 [ Mon Sep 22, 2008 3:38 pm ] |
| Post subject: | Need NEW Rebuild Piston Recomend? |
Like everyone else, Here's my plan on a rebuilt for A100 van. Strong stock rebuild with a 225, .30 over if needed. Standard/stock Bottom end with Doc's oiling mods and whatever other neat tricks he printed that I can't think of off hand. Erson's RV-15 cam, Stock rockers and such. Full Ported head with the BIG valves on both side, hardened seats too. Head milled .50-.70 Haven't decided yet how much. Looking for a 9.?-1 comp Blocked milled maybe 10-20 for clean up and lower deck height. S.S. with a Weber DGV, 727 stock tranny 3:55 rear. Stock gasket matched exhaust manifold w/2-1/4" tubes and turbo muffler. I just want a stronger than stock build outta this. If I can get 175 horses with this I will be happy. The thing is what is a good Piston that will put me in this window that will give good grunt for a van? I pretty much have everything else for this build but need this info. Any ideas? Thanks |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|