springs

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Old Message Board

All times are UTC-07:00

Forum locked This topic is locked, you cannot edit posts or make further replies.

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Mopar Madness

Post subject: springs

PostPosted: Wed Mar 27, 2002 10:11 pm

I have just finished rebuilding my slant six head and I got mopar cam PN#4529342 and the recommended springs to go with it. I opened up my cam box and looked at the cam card and it doesn;t list any installed height specs or in seat spring pressures? can anyone help?

craig_o_connor88@hotmail.com

Top

Reply with quote

Doc.

Post subject: Re: Valve springs

PostPosted: Thu Mar 28, 2002 12:34 pm

Quote:

: I have just finished rebuilding my slant six
: head and I got mopar cam PN#4529342 and the
: recommended springs to go with it. I opened
: up my cam box and looked at the cam card and
: it doesn;t list any installed height specs
: or in seat spring pressures? can anyone
: help?

Measure and give us the "free height" of the springs you have, my guess is that the springs should use a 1.7 installed height to give appx 110 # on the seat.
DD