| Slant Six Forum https://www.slantsix.org/forum/ |
|
| cam? https://www.slantsix.org/forum/viewtopic.php?t=34244 |
Page 1 of 1 |
| Author: | theslantingsix [ Wed Mar 11, 2009 6:01 pm ] |
| Post subject: | cam? |
i have ordered my cam from the machine shop its the erson 270 with the 465 lift i want to know how does it perform and what were some successful combinations for yall that have used the cam? i'm running a 3 in the floor manual so would it be better with the 833 or what? |
|
| Author: | 66aCUDA [ Thu Mar 12, 2009 6:07 am ] |
| Post subject: | |
Super six,mild port work, true the Deck up and CC your heads. OS valves and increased compression to 9.5 to 1. Recurve your Dist. This should give you a nice responsive DD. My02. Frank |
|
| Author: | theslantingsix [ Thu Mar 12, 2009 1:11 pm ] |
| Post subject: | |
how do you recurve your distributor? |
|
| Author: | 66aCUDA [ Thu Mar 12, 2009 5:05 pm ] |
| Post subject: | |
Someone did a nice write up here a few months ago...Use your Search function for Distributor Recurve and see if it comes up. Duster Idiot(ROB) is one of the best recurvers I know, Rock also has been playing with it recently. Frank PS if you cant find it let me know via PM |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|