Quote:
Hey I work at Lowes! Maybe I can find them.
I'm positive their intended for a garbage disposal 
, odd, my brain must have been in synch that day otherwise I would have walked right by them without a second thought 
Dave
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 1 BBL gaskets? https://www.slantsix.org/forum/viewtopic.php?t=34458 |
Page 1 of 1 |
| Author: | Rug_Trucker [ Mon Mar 23, 2009 11:04 am ] |
| Post subject: | 1 BBL gaskets? |
4 stores, zero gaskets! Can't order the gasket that goes between the air cleaner and the carb. Even NAPA! |
|
| Author: | dietz_diggler [ Mon Mar 23, 2009 6:52 pm ] |
| Post subject: | |
If all you need is the gasket for between the carb and air cleaner, I would use a heavy, thick gauge paper. I use "blotters" at work on grind wheels and happened across some w/ the right Inner Dia. I just trimmed the Outside Dia. to fit, for the side screw clamp style air filter on the old stromberg 2 bbls. This style needs them. They are just thick paper, kinda like the thin paper boxes for a deck of cards, not so much like weak construction paper though. I don't know what you running, but I don't use one at all on my 77 1bbl holley with a stock air cleaner unit. |
|
| Author: | Rug_Trucker [ Mon Mar 23, 2009 8:00 pm ] |
| Post subject: | |
74 1bbl Holley |
|
| Author: | bigslant6fan [ Mon Mar 23, 2009 8:06 pm ] |
| Post subject: | gaskets |
I,ll try my NAPA store and try to get a PN for you. |
|
| Author: | mighty mouse 63 [ Tue Mar 24, 2009 8:29 am ] |
| Post subject: | |
I aquired several generic rubber o-rings from my local Ace Hardware, can't recall there exact purpose in life (garbage disposal?) works just fine. Dave |
|
| Author: | Rug_Trucker [ Tue Mar 24, 2009 8:34 am ] |
| Post subject: | |
Hey I work at Lowes! Maybe I can find them. |
|
| Author: | mighty mouse 63 [ Tue Mar 24, 2009 8:51 am ] |
| Post subject: | |
Quote: Hey I work at Lowes! Maybe I can find them.
I'm positive their intended for a garbage disposal , odd, my brain must have been in synch that day otherwise I would have walked right by them without a second thought Dave |
|
| Author: | Eric W [ Tue Mar 24, 2009 9:23 am ] |
| Post subject: | |
I've used a gasket from a used oil filter before. A little loose and dosn't last that long, but works in a pinch. |
|
| Author: | Rug_Trucker [ Tue Mar 24, 2009 2:10 pm ] |
| Post subject: | |
Quote: I've used a gasket from a used oil filter before. A little loose and dosn't last that long, but works in a pinch.
Been using Purolator red rubber ring will look good in the engine compartment! Got a fresh one that only went 150miles 
|
|
| Author: | mighty mouse 63 [ Tue Mar 24, 2009 2:53 pm ] |
| Post subject: | |
Quote: Quote: I've used a gasket from a used oil filter before. A little loose and dosn't last that long, but works in a pinch.
Been using Purolator red rubber ring will look good in the engine compartment! Got a fresh one that only went 150miles Dave |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|