Slant Six Forum
https://www.slantsix.org/forum/

Hypothetically speaking, SWAG it, what ever...
https://www.slantsix.org/forum/viewtopic.php?t=35562
Page 1 of 2

Author:  wjajr [ Thu May 28, 2009 5:53 pm ]
Post subject:  Hypothetically speaking, SWAG it, what ever...

I know this is probably an old request, but could someone estimate a reasonable quarter mile time that my car could be expected to turn at a few hundred feet above seal level.

My 67' Dart GT Convertible is now set up as follows:
225 ci .030" over; head 1.70" & 1.44" valves ported, shaved .075" for 9.5:1 CR.; 390 4v Holley, Clifford Shorty headers & intake; 2" duals all the way back; 904 with 2600 stall TC; 3.55:1 Suregrip; P205/70R14 rubber, and disk / 10" drum brakes. Approximately 3300 pounds of iron & flesh.

Author:  66aCUDA [ Thu May 28, 2009 6:57 pm ]
Post subject: 

About 17.55 in the 1/4.
My guess swag method.
Frank

Author:  Joshie225 [ Thu May 28, 2009 7:11 pm ]
Post subject: 

16.8

Author:  Valleyant [ Thu May 28, 2009 11:54 pm ]
Post subject: 

I think it should go hi 15's........after some break-in miles make plans to visit your track and report back to us! good luck! nico

Author:  wjajr [ Fri May 29, 2009 6:04 pm ]
Post subject: 

Ahhh, virtual racing at its best. Three runs, and each time better than the last!!! Thanks guys, the track has been good to me today.

Some of you probably know my cars is still on jack stands collecting copious amounts of tree pollen while awaiting the return of the third member... So this was a little outing, so to speak, with the old girl.

June 6 we have a nice car meet at Winterport Drag Way. Perhaps I'll make a few passes.

Author:  66aCUDA [ Fri May 29, 2009 7:40 pm ]
Post subject: 

Go race Bill Also put it on there scales that day. Then come back and post so we can all enjoy.
Frank

Author:  Joshie225 [ Fri May 29, 2009 8:37 pm ]
Post subject: 

We should start a pool.

Author:  ceej [ Fri May 29, 2009 8:57 pm ]
Post subject: 

I ain't gonna bet against Josh! He's like this ET machine! :shock: :lol:

I'll take 16.81 !!! :lol:

CJ

Author:  wjajr [ Sat Jun 06, 2009 4:14 pm ]
Post subject:  UP Date

Went to the dragway & Car show today. Transmission was acting up, so I did not make any runs.

Author:  Rick Covalt [ Sat Jun 06, 2009 4:48 pm ]
Post subject:  What camshaft?

What cam are you running in it?

Rick

Author:  wjajr [ Sun Jun 07, 2009 8:31 am ]
Post subject: 

Hey Rick, take a number, that question has been asked a million times of me, I don't know. I purchased the car last year with a mystery cam all ready installed, and I have not opened up the lowered end as it is in good shape.

All I can say, it idles at 1100 rpms fairly smoothly with 10" of vacuum, and with pronounced lope in gear at 800 or so rpms with 5-6" vacuum. The power comes on real strong above 3200 rpms, and the engine will rev to 5K easily.

Author:  Rick Covalt [ Sun Jun 07, 2009 9:05 am ]
Post subject:  Ok

Ok That's cool. Sorry if I missed it somewhere.

Author:  wjajr [ Sun Jun 07, 2009 12:07 pm ]
Post subject:  Hang'in in Rick's garage

Me quoting me:
Quote:
Hey Rick, take a number, that question has been asked a million times of me, I don't know.


Gezz sorry Rick, didn't intend to sound so abrupt with such poor choice of words. It was meant to be rather satirical in a light hearted way. This car has been a magical mystery tour from day one, and I don't think I'm going to solve the cam puzzle soon.

How about this: Gezz Rick, beats the crap out of me LOL... What the hey, the magical mystery tour continues, I wish I knew, it would make things a bit more simple...

Got another beer around here? What? Not that watery crap, don't be afraid of flavor man... Yeah, yeah, I'll take it, OK I'll take it, any port in a storm LOL.

Author:  Rick Covalt [ Sun Jun 07, 2009 12:38 pm ]
Post subject: 

Quote:
Gezz sorry Rick, didn't intend to sound so abrupt with such poor choice of words.
No apology needed. I took it that way :D Well, I hope it runs 12's ! :lol:

Rick[/quote]

Author:  wjajr [ Sun Jun 07, 2009 8:20 pm ]
Post subject: 

Quote:
Well, I hope it runs 12's !
Maybe if I swap in the 300 C's plant.

Page 1 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/