people really buy pre bent break lines??
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Brake tubing kit? https://www.slantsix.org/forum/viewtopic.php?t=35919 |
Page 1 of 1 |
| Author: | Rick Covalt [ Sat Jun 20, 2009 12:34 pm ] |
| Post subject: | Brake tubing kit? |
I bought a universal brake line kit a while back that had 25 feet of tubing and a bunch of fittings in it. It had enough fittings to redo Ryans' whole Swinger. It was about $40 bucks or so. I can't seem to find it anywhere. I can find tubing but not a kit with the fittings. If anyone knows what I'm looking for let me know. I don't want pre-bent because I am re-routing quite a bit of the tubing. Thanks, Rick |
|
| Author: | makapipi [ Sat Jun 20, 2009 3:15 pm ] |
| Post subject: | brake line kit |
jc whitney may have that kit. |
|
| Author: | SlantSixDan [ Sat Jun 20, 2009 4:35 pm ] |
| Post subject: | |
www.cunifer.com |
|
| Author: | Pierre [ Sat Jun 20, 2009 5:14 pm ] |
| Post subject: | |
This is a fitting kit from Summit - has 10 of the common 3/8-24 inverted flare fittings for 3/16" tube, then the bigger fittings for 3/16" tube for master cylinder hookup. Classictube, inlinetube, rightstuffdetailing - Those places probably have all in one kits but they are expensive - you most likely can buy that fitting kit and a length of tube from summit including the $12 handling for less. |
|
| Author: | gmader [ Sat Jun 20, 2009 6:27 pm ] |
| Post subject: | |
Dan, I wish I would have known about Cunifer when I was doing my brake lines. I bought the "prebent" junk from Inline, and it has never fit come quite "prebent" enough. The lengths have been wrong (dart vs valiant wheelbase difference?), and various other problems. |
|
| Author: | Pierre [ Sat Jun 20, 2009 9:18 pm ] |
| Post subject: | |
I just sat down and looked through the site, good variety. I like how easily that guy bent the tubing with his hand. Not cheap though. Nice link Dan. Those pre-bent deals are only as good as the originals they received to duplicate. Their flaring tool looks neat. I always wanted to try one of the hydraulic ones as well. |
|
| Author: | Rick Covalt [ Sun Jun 21, 2009 10:02 am ] |
| Post subject: | Thanks |
Thanks Dan & Pierre, That will do it! What's funny I was doing a search on Summit myself and could not find what I was looking for. Appreciate the help, Rick |
|
| Author: | slantsixlancer [ Thu Jul 16, 2009 11:53 pm ] |
| Post subject: | |
people really buy pre bent break lines??
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|