| Slant Six Forum https://www.slantsix.org/forum/ |
|
| adjustable rocker arms https://www.slantsix.org/forum/viewtopic.php?t=35980 |
Page 1 of 1 |
| Author: | crazybazz [ Wed Jun 24, 2009 8:31 am ] |
| Post subject: | adjustable rocker arms |
I own a 1966 plymouth valiant signet with a 225 slant six , modified as per hotrod magazine article "slant sickness" my problem is my adjustable rocker arms are worn out , no running torque on a few adjuster screws, (loose). I have to keep regapping every so often. I have worn out my fingers checking sites for replacement originals and thought of going to adjustable roller rockers but no luck. Am I stuck going to the junk yard ? Steve |
|
| Author: | SlantSixDan [ Wed Jun 24, 2009 9:11 am ] |
| Post subject: | |
Welcome on the board. There are a few ways of addressing this issue. See the valve adjustment article. There's also at least one outfit selling rebuilt rocker shaft assemblies with good rockers: http://www.rockerarms.com |
|
| Author: | Doc [ Wed Jun 24, 2009 10:34 am ] |
| Post subject: | |
I have a bunch of good used SL6 rocker arm assemblies, if you want to go in that direction. DD |
|
| Author: | emsvitil [ Wed Jun 24, 2009 2:09 pm ] |
| Post subject: | |
What about adding a jam nut? |
|
| Author: | crazybazz [ Fri Aug 21, 2009 9:21 am ] |
| Post subject: | |
Just picked up new adjustable rocker arms from Kanter. Works great. Problem solved |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|