| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Hydraulic Clutch. rock? https://www.slantsix.org/forum/viewtopic.php?t=36375 |
Page 1 of 1 |
| Author: | raPoM [ Mon Jul 20, 2009 5:40 pm ] |
| Post subject: | Hydraulic Clutch. rock? |
rock- I have been searching your post about the hydraulic clutch set up you ran with your 833 od. Can you give me some more info/pictures? I think I want to try and do away with the torque shaft,and gain some much needed clearance.Any help would be appreciated. 
|
|
| Author: | raPoM [ Mon Jul 27, 2009 4:15 pm ] |
| Post subject: | |
Bump |
|
| Author: | rock [ Fri Jul 31, 2009 9:42 am ] |
| Post subject: | Rapom, I will PM you |
Hello! Last couple weeks I have been stuck under an 89 volvo 240 (love them bricks, the late model slant!) that my significant other found out how far it would go with no oil. It is most shocking to see a fist size hole in block and busted pistons in one of your favorite cars and hear "I think I hurt your car, can you fix it?" Much more work for us thick guys than with all the room undr slant trucks. And 95 degrees and skeeters, too. But it's back together and now back to reading the forum. I will PM you. Thanks for asking, rock '64d100 |
|
| Author: | raPoM [ Fri Jul 31, 2009 9:58 am ] |
| Post subject: | |
No worries rock! Thanks for the reply,I will be waiting for your pm
|
|
| Author: | Rick Covalt [ Sat Aug 01, 2009 2:13 pm ] |
| Post subject: | Me too? |
Rock could you Pm me as well with the same info? Thanks, Rick |
|
| Author: | slantsixlancer [ Fri Aug 07, 2009 6:53 am ] |
| Post subject: | |
rock would you pm me the info too... ...If a solid way has already been done, that would save alot of trouble..
|
|
| Author: | rock [ Sat Aug 08, 2009 6:16 am ] |
| Post subject: | OK guys, this weekend will do it, |
Sure, with some pics, too. this weekend should see it done, I had to work at work this week. rock |
|
| Author: | Rick Covalt [ Mon Aug 31, 2009 9:15 am ] |
| Post subject: | Anyone? |
Did anyone get these pics? I would still like to see them. Thanks, Rick |
|
| Author: | rock [ Thu Sep 03, 2009 7:48 am ] |
| Post subject: | Rick and all, working on it! |
Guys, I took some pics, took em to Rite AId, went to get em, store out of business and moved. I wanted them both print and CD is why I went there. Sigh. I got so into this I started a little paper like the shifter one Juan (Argentina) and I did a while back. What ya might call project creep. THis weekend will be a good time to just get back to the pics and a quick description. rock '64d100 |
|
| Author: | slantsixlancer [ Thu Sep 03, 2009 5:57 pm ] |
| Post subject: | |
I would love pics too..and any info gained.. please
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|