Fellow Slanters,

A couple of us are getting a group purchase together for the Aussiespeed Hurricane intakes (4bbl or 2bbl). These should end up being $300-360 shipped. I don't think the blower manifolds are ready, but we can inquire about those.

A few of you voiced your interest earlier, and I think the list was:

Lou
mopardemon71
66aCuda
NewLancerMan
wvenable

Who else is in?? Please speak up in the next several days so we can get these on the way.

Thanks!

Lou

_________________
Home of Slant6-powered fun machines since 1988

do these have injector / n20 bungs on them? I cant remember.


Greg

_________________
http://www.youtube.com/hyperpack

I'm interested in a 2-bbl version if they are on the low end of that scale...

Do we need to put down a deposit?
Do we have to pay up front or when they come in?
What is your best guesstimate of when the buyer will be receiving these?



I seen them sell a few of these on eBay a while back for $250.00 USD (+125.00 shipping anywhere in the states). So with shipping being combined for a larger order I don't see ~$300.00 each being out of the question.
Would they all get shipped over here together and then seperated and shipped out individually? (Probably the cheapest way)

_________________
1969-1/2 Dodge Super Bee A12 (440 Six Pack, 4-spd, Dana 60)
1974 Plymouth Duster 360 (4-spd, 8.75")
1973 Plymouth Duster (225, auto, 8.25")
2001 Dodge Ram 1500 QC 2wd (5.9L, auto, Dana 60)

I am in for the 4 bbl intake. When will this all come togather?

Only if they have the blower intake ready. I'm ready for forced induction.

_________________
Joshua

Ok kids, I'm kind of heading on this with lou. The super charged intake is still under develpment. the castings have been up dated with Doc's in put. If you are in for this buy pm me with you wants but keep it simple for me please.

_________________
it's like a vw, sounds like a million miles an hour but goes really slow. (for now)

I'm in(4bbl)! This is my second intake, when Stone and I bought, it was $500 shipped. Yes they have nitrous bung-holey-o's. Or was it corn holey-o's? I can't remember.

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

The lowest prices were when the exch rate was $0.65 for an Oz dollar, and now it's $0.80 or so. We will not get down to $300 unless things change or they give us a great group deal.

There are inj/N2O bungs cast in, yes.

I can cover a couple of people up front if necessary, otherwise deposits ior full pay up front would be nice. mopardemon71 can comment on timing, but I would guess a month.

Intake list:

demon (4bbl)
Lou (4bbl)
wvenable (4bbl)
Menko (4bbl)
raPoM (4bbl)
Daniel (2bbl)
66aCuda (4bbl??)

Thanks!

Lou

_________________
Home of Slant6-powered fun machines since 1988

Do they have a date for the blower intake?

_________________
Joshua

Cool.
I have a couple other deals pending for some Six Pack parts for my Super Bee so those will come first if I can get them.
If they fall through I'll get one of these manifolds!
I'll let you guys know in the next couple of days!

_________________
1969-1/2 Dodge Super Bee A12 (440 Six Pack, 4-spd, Dana 60)
1974 Plymouth Duster 360 (4-spd, 8.75")
1973 Plymouth Duster (225, auto, 8.25")
2001 Dodge Ram 1500 QC 2wd (5.9L, auto, Dana 60)

Ill get an update on the blower manifold. Ive been going back an forth with them. The pictures i have with the prototype look good.
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered

Do these have the update for extra room needed to get the washers on easier like Doc suggested?

Will they have the plenum dividers like Doc suggested?

Did they make any other changes?

_________________
1969-1/2 Dodge Super Bee A12 (440 Six Pack, 4-spd, Dana 60)
1974 Plymouth Duster 360 (4-spd, 8.75")
1973 Plymouth Duster (225, auto, 8.25")
2001 Dodge Ram 1500 QC 2wd (5.9L, auto, Dana 60)

Hi guys,

I have been talking with Cody regarding the organization of the group buy, I hope to have a confirmed 'shipped' per-piece price shortly, so this should provide those sitting on the fence with accurate information by which they can make their decision. I will post this information here once I have it confirmed.

Those who have not seen the new 'revision' casting of the SL6 Hurricane 2 & 4-barrel intakes can find them here : [url]http://www.pentastarparts.com.au/sunshop/index.php?l=search_list&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=0&s[search]=slant+hurricane[/url]

Thanks
Ray

Hi folks,

Ok, we have some figures for your consideration. The group buy requirements are as follows:

~ Minimum Order : 5 x Intake Manifolds (2 or 4-barrel)
~ DHL Airfreighted To Nominated US Destination : This delegate will then ship to the end-user.
~ $350(USD)ea
~ All payments to be forwarded to Pentastar Parts & Restorations directly per order. Accepted payment methods include : Direct Credit Card (Mastercard/Visa) or PayPal (Add 3%)

Expected international shipping time is 7-10 days. These intakes are in stock & ready to ship immediately, so the quicker we have them paid for the sooner we can get them to you. This offer will only last whilst the current exchange is around the $0.80c exchange rate.

~ Direct Credit Card payments can be made by calling : 011 61 2 9608 8888
~ Please forward PayPal payments to : sales@pentastarparts.com.au

If you would like to contact me via email : sales@pentastarparts.com.au

Thanks
Ray

Hi Ray,

Thanks for doing this group buy, and thanks for the updated info.

Two questions:

1) Does the $350 include local shipping in the US, or are we responsible for that through the "delegate?"

2) Some of us are fond of the 3.6"+ bore Permaseal (Aussie) head gaskets. Can you get those and include say 10-15 of them in the same box? I seem to remember the cost of those as about $25AU with a bulk order. Of course I understand if this is too much trouble.

Thanks again,

Lou

_________________
Home of Slant6-powered fun machines since 1988