I got a good deal on a cam off Craigslist and would like to know what to expect from these numbers.
Cams are not my strong suit- still trying to visualize the geometry of it all.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Cam Card Decipher Please https://www.slantsix.org/forum/viewtopic.php?t=37020 |
Page 1 of 1 |
| Author: | stonethk [ Mon Sep 07, 2009 1:39 pm ] |
| Post subject: | Cam Card Decipher Please |
I got a good deal on a cam off Craigslist and would like to know what to expect from these numbers. Cams are not my strong suit- still trying to visualize the geometry of it all.
|
|
| Author: | james longhurst [ Mon Sep 07, 2009 1:57 pm ] |
| Post subject: | |
I have no experience with that cam, but it looks pretty mild to me. Bet it would work well with a super six setup. Should make for a nice street motor. -James |
|
| Author: | Dart270 [ Mon Sep 07, 2009 2:11 pm ] |
| Post subject: | |
Yep, street cam. That is just one little bit above a stock '71 cam. Pretty much the same as a MP 0.436" cam. 8.5:1 true compression is about right with pump gas. I suggest centerlining it at 102 deg. Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|