| Slant Six Forum https://www.slantsix.org/forum/ |
|
| how much longer is a 727 then 904 https://www.slantsix.org/forum/viewtopic.php?t=38106 |
Page 1 of 1 |
| Author: | illldeca [ Thu Nov 26, 2009 8:05 pm ] |
| Post subject: | how much longer is a 727 then 904 |
so i know how much to get the drive shaft shortend and balanced cuz it looks to be about 2/3 inches to long on my d150 pick up |
|
| Author: | Joshie225 [ Thu Nov 26, 2009 8:29 pm ] |
| Post subject: | |
2/3rds of an inch (0.66")? From the front face of the trans to the U-joint center-line of the yoke on at A-904 it's 34.12", A-727 is 38.13" or 4.01" longer. This is from my old Direct Connection chassis book. I would measure your 904 and 727 to be sure. |
|
| Author: | illldeca [ Thu Nov 26, 2009 10:02 pm ] |
| Post subject: | |
ya ill just messure the lengght of the diff to rear end with the shaft yoke in the tranny n figure it out i gues thanks dude |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|