| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 9 1/4 clutch disc https://www.slantsix.org/forum/viewtopic.php?t=38926 |
Page 1 of 1 |
| Author: | thedeputy [ Sun Feb 07, 2010 5:37 am ] |
| Post subject: | 9 1/4 clutch disc |
I'm still, again, looking for a replacement clutch disc (just the disc) I had this one shipped over http://cgi.ebay.com/ebaymotors/clutch-d ... ccessories But it got damaged during transport, plus the friction material is rock hard which makes me doubt that it's a good street clutch. Then I came across this one http://cgi.ebay.com/ebaymotors/87-91-2- ... ccessories Can I use this disc with my 9 1/4 clutch assembly? Will it fit on my standard 1967 A833 Will it handle the torque of my standard 72 225 with super six intake. The reason I ask this is because the original 9 1/4 clutch disc can not be found at a local car parts store, but the one from the dakota might be, since it's a little more recent. Thanks, Antoon |
|
| Author: | volaredon [ Sun Feb 07, 2010 7:24 am ] |
| Post subject: | |
I didn't see a location for you. I'd look and se eif there's a clutch/driveline place nearby; there's one not too far from here. they can reface your disc and build you a pressure plate to your specs, as well. I'd look in a phone book and see if you have a similar place near you. local warranty (as much of one's usually on a clutch anyway) and don't have to worry about dealing cross country. |
|
| Author: | thedeputy [ Sun Feb 07, 2010 9:14 am ] |
| Post subject: | |
there are no shops like that around here. I come from the netherlands, so the search always goes through the internet. Antoon |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|