Thank you sir
Anybody reading this wants or could use these items PM me your addy and I'll pop'em back in the mail.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Canadian ? https://www.slantsix.org/forum/viewtopic.php?t=39167 |
Page 1 of 1 |
| Author: | 6shotvanner [ Fri Feb 26, 2010 7:20 am ] |
| Post subject: | Canadian ? |
Got a couple items for 'free' from a Canadian fellow and I'm wondering if anybody here can tell me what I have? Set of 'Motomaster V-groove' plugs TRL 79.Any good,junk etc? Mopar bearing 2072060 Mopar seal 04031884 He thinks the last two items might be for an A100 series steering box but cann't remember as he's had them kicking around for abit. Any help is welcome and thanks eh! |
|
| Author: | SlantSixDan [ Fri Feb 26, 2010 7:47 am ] |
| Post subject: | |
Motomaster is Canadian Tire's house brand of auto parts. These particular ones, I believe, were made by NGK. Not sure of application. 2072060 comes up as a steering gear thrust bearing, same as 3633412, fitting D100-D350 Dodge trucks, probably lots of years; 2070nnn is a part first released around 1960 or so, and 3633nnn is a part first released around 1972 or so. 4031884 comes up as a steering gear worm shaft seal - not sure of years. |
|
| Author: | 6shotvanner [ Fri Feb 26, 2010 10:11 am ] |
| Post subject: | |
Thank you sir Anybody reading this wants or could use these items PM me your addy and I'll pop'em back in the mail.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|