| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Pressure Plate Torque Specs??? https://www.slantsix.org/forum/viewtopic.php?t=4069 |
Page 1 of 1 |
| Author: | 87Slant_sickness [ Mon Aug 19, 2002 6:30 pm ] |
| Post subject: | Pressure Plate Torque Specs??? |
hey all, well got a new clutch and all and wonderin what the specs should be to torque the pressure plate to the fly wheel. thanks Justin slantsickness@hotmail.com |
|
| Author: | 69dart [ Mon Aug 19, 2002 7:36 pm ] |
| Post subject: | Re: Pressure Plate Torque Specs??? |
my book says 55 ftlbs Quote:
:
: hey all, : well got a new clutch and all and wonderin what : the specs should be to torque the pressure : plate to the fly wheel. thanks : : Justin |
|
| Author: | bud L. [ Tue Aug 20, 2002 8:20 pm ] |
| Post subject: | Re: Pressure Plate Torque Specs??? |
Quote:
: my book says 55 ftlbs
Are you sure about that? I don't know for positive, but 55'#'s seems like alot for those little bolts. If you were referring to the flywheel to crank bolts that'd seem about right. fglmopar@aol.com |
|
| Author: | DusterIdiot [ Tue Aug 20, 2002 8:55 pm ] |
| Post subject: | Re: Pressure Plate Torque Specs??? |
Quote:
: Are you sure about that? I don't know for : positive, but 55'#'s seems like alot for : those little bolts. If you were referring to : the flywheel to crank bolts that'd seem : about right. It is... good call Bud. Clutch Cover to Flywheel specs: 5/16" bolts = 200 in/lbs 3/8" bolts = 30ft./lbs Flywheel Bolts = 55 ft/lbs -D.Idiot |
|
| Author: | 69dart [ Wed Aug 21, 2002 4:29 pm ] |
| Post subject: | Re: Pressure Plate Torque Specs??? |
OOPS! I need to get some more sleep or something. I looked at the flywheel to crank. SORRY Quote:
:
: Are you sure about that? I don't know for : positive, but 55'#'s seems like alot for : those little bolts. If you were referring to : the flywheel to crank bolts that'd seem : about right. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|