i've pulled and rebuilt alot of engines in my time, but i've never pulled a slant 6 before. i always hook my engine chain on the head but these being on a slant angle, it wont work. i know this might sound dumb, but whats the best way to hook the puller chain up so it will come out even? dave.

Her's a thread that shows a few different ways. Remember the search function is our friend Good luck
http://www.slantsix.org/forum/viewtopic ... ng&start=0

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

I made a "fixture" out of a piece of angle iron that used the 5/16 or 3/8 bolts for the temp sensor, and two other bolt bosses on the driver's side of the head. The motor hung correctly! Mike

_________________
Good gun control is hitting your target repeatedly