You have the parts lits right.
If you have the bar correct, when mounted to the lower control arms. I found that 1" of tension pushing the bar where straps can then bolt on, is just fine. More than that if your cornering hard. 
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Sway bar on a '63 https://www.slantsix.org/forum/viewtopic.php?t=41118 |
Page 1 of 1 |
| Author: | hellion_locdogg [ Tue Jul 20, 2010 8:17 pm ] |
| Post subject: | Sway bar on a '63 |
Are there any special brackets or mounts that I will need to look for? I am making and welding my own LCA mounts and buying the hoop mounts. Am I missing anything special? ,Cliff |
|
| Author: | Mister Twister [ Wed Jul 21, 2010 3:26 am ] |
| Post subject: | |
You have the parts lits right. If you have the bar correct, when mounted to the lower control arms. I found that 1" of tension pushing the bar where straps can then bolt on, is just fine. More than that if your cornering hard.
|
|
| Author: | Dart270 [ Wed Jul 21, 2010 6:31 am ] |
| Post subject: | |
Stock 62-66 sway bar?? Addco? Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|