Pressure plate torque settings.

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Transmission & Rearend

All times are UTC-07:00

Pressure plate torque settings.

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Post subject: Pressure plate torque settings.

PostPosted: Thu Jul 22, 2010 9:48 pm

Offline

TBI Slant 6

Joined: Sun Jul 05, 2009 9:13 pm
Posts: 158
Location: Seattle, WA
Car Model:

Pressure plate is 30ft lbs for 3/8" bolts right? Thats what it says in the Haynes book but they have been known to lie (small block rocker shaft torque settings).

Top

Profile

Reply with quote

DusterIdiot

Post subject: Yes, but...

PostPosted: Fri Jul 23, 2010 5:22 am

Offline

Board Sponsor

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:

30 ft/lbs for 3/8" bolt for clutch cover to flywheel...The standard bolts for the slant six covers are 5/16" so then it becomes 200 in/lbs...

-D.Idiot