| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Engine detailing trick https://www.slantsix.org/forum/viewtopic.php?t=4117 |
Page 1 of 1 |
| Author: | Daniel J. Stern [ Tue Sep 03, 2002 5:38 pm ] |
| Post subject: | Engine detailing trick |
Y'all are probably familiar with Copper-Cote, a gasket sealer compound that contains powdered copper and is available in daub-on and spray-on. Spray Copper-Cote on your exhaust manifold(s). They do not need to be precleaned, sandblasted, or removed from the car. Use two even coats. Let dry for at least an hour. Drive normally for a day or three, then open the hood and look at your manifold(s), which appear to be brand-new cast iron. The copper, when heated, takes on a beautiful deep metallic iron black colour. (If you see copper and rainbow colours, keep driving.) Seems to be pretty durable, too! (It works on V8s and 4's, too...Shhhhhh!) DS redbear@vrx.net |
|
| Author: | Trysix [ Tue Sep 03, 2002 7:42 pm ] |
| Post subject: | Re: Engine detailing trick |
Hmmm.. I wonder what it will do on rusty headers? Trysix soupitup@msn.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|