| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Radiator question https://www.slantsix.org/forum/viewtopic.php?t=41750 |
Page 1 of 1 |
| Author: | mylittledart [ Sat Sep 04, 2010 11:30 am ] |
| Post subject: | Radiator question |
my old radiator cracked in my 67 post dart the other day so i'm looking to get a new one. i found an all aluminum one for $110 at Genesis auto parts. Part number ALL12423X9114AA. has any one every used this radiator before or have any reviews on the radiator they used. also i'm new to mopar i was a big gm guy till i got this dart, so i don't mean to post some question that are kinda stupid. i just want get good part and info. thanks for any help |
|
| Author: | Josh P [ Sat Sep 04, 2010 12:47 pm ] |
| Post subject: | |
Hey there just wanted to note that I also was a GM guy until I got my Dart. And also, I'm sure others will note that aluminum radiators don't perform cooling tasks as well as copper, and they are more high maintenance. So unless you are planning to race and need an extra light radiator, it will be suggested that you find a copper one. As far as a recommended radiator, no clue, haven't had to get one yet. |
|
| Author: | wjajr [ Sat Sep 04, 2010 1:51 pm ] |
| Post subject: | |
Check here, don’t be afraid to call. I got one of these radiators early '09 for my 67, it is copper, and cools just fine. Mount fit was good, lower hose connection required after market hose for a nice fit around belts because of the angle of the connection was at 90 degrees from tank, not like the angled factory radiator. |
|
| Author: | mylittledart [ Tue Sep 07, 2010 3:18 pm ] |
| Post subject: | |
hey thanks for the help guys, hopefuly soon i'll get some pics of my dart. i ended up solder around the upper hose fitting and (nock on wood) lol it seams to be holding. but ya i don't race your at least not yet i just thought they might make the car run cooler |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|