| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Slant 6 Head https://www.slantsix.org/forum/viewtopic.php?t=4218 |
Page 1 of 1 |
| Author: | NORMAN FOSTER [ Tue Sep 24, 2002 6:54 am ] |
| Post subject: | Slant 6 Head |
IS THE HEAD ON A SLANT 6 225 AND 198 THE SAME.WANT TO HAVE A HEAD PORTED AND POLISHED AND STILL NOT SURE ABOUT THE MOTOR BEING A 225 OR 198.ANY THOUGHTS NORMAN@ALLTEL.NET |
|
| Author: | GTS225 [ Tue Sep 24, 2002 8:43 am ] |
| Post subject: | Re: Slant 6 Head |
Quote:
: IS THE HEAD ON A SLANT 6 225 AND 198 THE : SAME.WANT TO HAVE A HEAD PORTED AND POLISHED : AND STILL NOT SURE ABOUT THE MOTOR BEING A : 225 OR 198.ANY THOUGHTS ************************************************** Both heads will bolt up to either engine. There were some design changes in the combustion chamber in about '68, which improved the head, so a post'68 head would be best to modify. This is all presuming you have a solid-lifter engine, not hydraulic-lifter engine. Roger GTS225@aol.com |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|