Slant Six Forum
https://www.slantsix.org/forum/

Dipstick
https://www.slantsix.org/forum/viewtopic.php?t=42400		 Page 1 of 1
Author:  60 Plymouth [ Tue Oct 26, 2010 6:21 am ]
Post subject:  Dipstick
Hi all,

Looking for a dipstick for a 1960 A-904. I believe the parts exchange from 1960-66, I think one of the Doc's posts elsewhere on this forum stated this.

I've put an ad on here but had no luck, so does anyone know where I can get one new?

Alternatively, if anybody could give me all the necessary dimensions to make one, then I'd happily do so.

Thanks a lot,
60 Ply
Author:  VOLOVICK [ Tue Oct 26, 2010 2:53 pm ]
Post subject: 
BELIVE IT OR NOT I GOT ONE FOR MY 63 VALIANT FROM THE PART DEPARTMENT AT THE DEALER. About two week ago
Author:  Wizard [ Tue Oct 26, 2010 3:31 pm ]
Post subject: 
That is strange, back housing of the water pump for carbed 2.2L is NLA since 2003 and I needed one. Not the other half that contains rotating pump. So I'm modifying a TBI water pump to clear the fuel pump so I have caravan drivable for awhile. Once I have the pump out, crack in radiator nipple will be repaired. Housing is aluminum and is weldable.

Cheers, Wizard
Author:  Doc [ Tue Oct 26, 2010 3:41 pm ]
Post subject: 
I have a few used ones... if it comes down to that.
DD
Author:  60 Plymouth [ Mon Nov 01, 2010 7:12 am ]
Post subject: 
Hi Guys,

Thanks for the replies.

Doc, very interested: you have a PM.

All the best,
60 Ply
Author:  60 Plymouth [ Fri Nov 19, 2010 3:51 am ]
Post subject: 
Anybody have a part number for the 1960-66 torqueflite dipstick?

I might have more luck with the chrysler dealer if I can give them a number.

Thanks a lot,
60 Ply
Author:  Charrlie_S [ Fri Nov 19, 2010 5:23 am ]
Post subject: 
Part number for a 66 904 filler tube is 2538 834. for the stick it is 2466 302.
Unable to locate filler tube, located stick at these dealers.
http://www.bradsnosparts.com/
http://collectorsautosupply.com/
http://www.dpmotorparts.com/
I have not purchased from any of these vendors.
Author:  60 Plymouth [ Fri Nov 19, 2010 5:30 am ]
Post subject: 
Hi Charrlie,

Thanks for the response. Don't suppose you know the p/n for the 1960 version do you? I think 66+ was different (a few cross references seem to agree).
Author:  Charrlie_S [ Fri Nov 19, 2010 6:35 am ]
Post subject: 
Quote:
Hi Charrlie,

Thanks for the response. Don't suppose you know the p/n for the 1960 version do you? I think 66+ was different (a few cross references seem to agree).
Sorry, I only have parts manual for 1966,67,68,69.
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/