| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Painting my '66 Vert... https://www.slantsix.org/forum/viewtopic.php?t=42401 |
Page 1 of 1 |
| Author: | 1966DartConvertible [ Tue Oct 26, 2010 7:42 am ] |
| Post subject: | Painting my '66 Vert... |
Still work in progress, need to paint strip everything under the hood and the body need more sanding to bare-metal... Here you go:         Fenders are off the car and amazingly not even a SINGLE HOLE of rusted panel behind the front tires and inside the fender well... not bad for 44 yr old lady ay?... Cheers Syed |
|
| Author: | 1966DartConvertible [ Sun Oct 31, 2010 9:07 am ] |
| Post subject: | |
more updates...     
|
|
| Author: | 1966DartConvertible [ Mon Nov 01, 2010 9:10 am ] |
| Post subject: | |
taken using crappy cellphone...    sprayed with primer... I smell progress 
|
|
| Author: | Dart270 [ Tue Nov 02, 2010 9:16 am ] |
| Post subject: | |
Looks like a lot of hard and high quality work! Lou |
|
| Author: | 1966DartConvertible [ Tue Nov 02, 2010 8:26 pm ] |
| Post subject: | |
Quote: Looks like a lot of hard and high quality work!
a little more progress on the restoration...Lou Engine bay:     the rest:    sprayed etch on the door and front fender, the rest will follow...   Sorry if im boring you guys with this restoration pictures  Its my 1st real bumper to bumper restoration so im just a little excited...
|
|
| Author: | 60 Plymouth [ Wed Nov 03, 2010 4:29 am ] |
| Post subject: | |
Not at all! It's all to come for me, so good to see what I'm getting myself into. You look like you're doing a real thorough job! Looks like you got one hell of a bodyshell to work with, shall be a good'un for another 50 years! Good luck and more pixtureses! 60 Ply |
|
| Author: | 60 Plymouth [ Wed Nov 03, 2010 4:30 am ] |
| Post subject: | |
By the way, what have you been stripping her with (if you see wht I mean)? |
|
| Author: | 1966DartConvertible [ Wed Nov 03, 2010 6:05 am ] |
| Post subject: | |
Quote: By the way, what have you been stripping her with (if you see wht I mean)?
Combination of hot air gun and a scraper until like this: then brush on the paint stripping chemical and leave to dry for a few minutes, then wipe it off. Finally use the power-tool with the abrasive paper on and sanding it down till like this:
|
|
| Author: | 1966DartConvertible [ Sat Nov 06, 2010 5:55 am ] |
| Post subject: | |
Green Green grass of homeeee...        What do you think?
|
|
| Author: | 1966DartConvertible [ Wed Nov 10, 2010 4:39 am ] |
| Post subject: | |
Yeayyyy new floorpan...    here is the old floorpan... (see the holes...) 
|
|
| Author: | stonethk [ Wed Nov 10, 2010 8:51 am ] |
| Post subject: | |
Very nice- keep the pics coming. 
|
|
| Author: | 1966DartConvertible [ Fri Nov 12, 2010 12:54 am ] |
| Post subject: | |
New Old Stock (NOS) Intake and Exhaust valves from Good Ol' US of A...  
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|