| Slant Six Forum https://www.slantsix.org/forum/ |
|
| adjusting bands in a 727 https://www.slantsix.org/forum/viewtopic.php?t=42598 |
Page 1 of 1 |
| Author: | 4x4jimbo [ Tue Nov 16, 2010 4:10 pm ] |
| Post subject: | adjusting bands in a 727 |
i have a early ramcharger with the 225 and 727+4x4.how do i adjust all the bands in it? i cant read the manual on the site its messed up at that part. thnks jimbo |
|
| Author: | lancer61 [ Wed Nov 17, 2010 1:06 am ] |
| Post subject: | |
Kickdownband Loosen lock not five turns, Tighten band adjusting screw to 72 inch pounds, Back of screw 2 turns, Lock nut (25 foot punds), Low/Reverse band Loosen lock not five turns, Tighten band ajusting screw to 72 inch pounds Back of screw 5 1/4 turn, Lock nut (25 foor pounds), That is from a 904 manual, if I am correct the only difference for a 727 is that you should should loosen the screw for low/reverse band 2 turns instead of 5 1/4. Please correct me if I am wrong here |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|