does anyone know the stock 225: block height(center line of crank to deck)?

Piston compression height?

valve to piston clearance(stock cam and rockers)?

Stock Rocker arm ratio?

Stock cam specs(lift int. and exh.) and duration for both

thanks

You might find some answers in Doug's stroking article at <A HREF="http://slantsix.org/articles/stroking/s ... ing.htm</A>

Chuck


sl6@omnipages.com

See this link: <A HREF="http://slantsix.org/articles/stroking/worksheet.jpg">http://slantsix.org/articles/stroking/worksheet.jpg</A> (10.68" appx)
:
: Piston compression height? ------(1.765" stock)
:
: Valve to piston clearance(stock cam and rockers? --------- well over .300 but it's best to check.
:
: Stock Rocker arm ratio? ----(1.5 advertized but they are more like 1.48 + / - .02)
:
: Stock cam specs (lift int. and exh.) and duration for both --- (See the link:)
DD


Stock Cam Specs.