| Slant Six Forum https://www.slantsix.org/forum/ |
|
| "new" hemi rods https://www.slantsix.org/forum/viewtopic.php?t=4296 |
Page 1 of 1 |
| Author: | Tim Keith [ Mon Oct 14, 2002 7:37 pm ] |
| Post subject: | "new" hemi rods |
According to the Hot Rod article the "new" hemi con rods are 6.242" with a journal pin size of 2.126". These rods might work on a 170, the hemi rods are .537 inch longer than stock 170 rods with a .061" smaller pin. I think there could be metric pistons with a compression height to match the new hemi rods. The stock C.H. is 1.740" |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|