Anyone know who put this together?
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Whose supercharged setup is this? https://www.slantsix.org/forum/viewtopic.php?t=43013 |
Page 1 of 2 |
| Author: | SlantSixDan [ Sun Dec 26, 2010 7:53 am ] |
| Post subject: | Whose supercharged setup is this? |
Anyone know who put this together?
|
|
| Author: | Exner Geek [ Sun Dec 26, 2010 8:10 am ] |
| Post subject: | |
It looks like Steve Nitti's motor, this is more information about it on the Racing category. |
|
| Author: | Sam Powell [ Tue Dec 28, 2010 10:19 pm ] |
| Post subject: | |
WOW! What is that going it? You think it would fit an A body engine bay? Sam |
|
| Author: | pishta [ Thu Mar 24, 2011 3:03 pm ] |
| Post subject: | |
Look at the water pump, right in the middle....That is out there though. Ill take it! |
|
| Author: | Valleyant [ Thu Mar 24, 2011 5:30 pm ] |
| Post subject: | |
Don't know who put this one together but it is very nice. Looks like a 170. Also, it looks like the headers have a flange that runs the entire length of the cylinder head and the intake is bolted on top of it. Sweet Slant! |
|
| Author: | Dart270 [ Thu Mar 24, 2011 6:27 pm ] |
| Post subject: | |
Has this thing seen the street or a track yet? I will not be impressed until it does. At that point, I expect to be impressed... Lou |
|
| Author: | pishta [ Thu Mar 24, 2011 10:00 pm ] |
| Post subject: | |
Quote: Don't know who put this one together but it is very nice. Looks like a 170. Also, it looks like the headers have a flange that runs the entire length of the cylinder head and the intake is bolted on top of it. Sweet Slant! How's that for cracking potential??
|
|
| Author: | Hemidup [ Fri Apr 01, 2011 4:53 pm ] |
| Post subject: | |
Quote: It looks like Steve Nitti's motor, this is more information about it on the Racing category.
Yup, thats Nitti's motor and the final engine has come a long way and looks much better than the mockup shown in that pic.
|
|
| Author: | Hemidup [ Fri Apr 01, 2011 5:16 pm ] |
| Post subject: | |
Quote: Has this thing seen the street or a track yet? I will not be impressed until it does. At that point, I expect to be impressed...
Why yes it has. Denny made her maiden voyage down the 1/4, leaving from an idle, netted a high 1.7x 60' and ran a 12.10 @ 112. Than the front cover on the converter failed and oiled down the track at the turn off, so we only got the one pass in.Lou After the converter was repaired, we took Steve's car to our local 1/8 mi for TnT. Playing around with different launch technique's, we finally got the car to run a 1.61 60' 7.19 @ 98mph. (it still needs more converter) And after we were done having our fun, we put Steve behind the wheel and let him have his fun with his new ride. Once the snow melts and our tracks are open, we're taking Steve's car back out and run at a 1/4 mi track. With a little more tuning and striving to get the car a better 60', should get his car into the 10's easily. Denny and I strived long and hard on this one off /6 and when Steve was rewarded with the Best Engine Award at the St. Paul World of Wheels, it damn near made me cry. |
|
| Author: | polkat [ Sat Apr 02, 2011 2:12 am ] |
| Post subject: | |
What kind of supercharger is it, and are there details anywhere on the build? Thanks! ________ Blonde_Sin |
|
| Author: | Dart270 [ Sat Apr 02, 2011 6:03 am ] |
| Post subject: | |
Hemidup, Thanks so much for your input, both on building the engine, and on reporting its progress. Glad to hear you are working the bugs out. Hope I can see this car in person on some future visit to the Twin Cities, or maybe at a Slant 6 race?? Congrats on the best engine trophy!! All the best, Lou |
|
| Author: | Hemidup [ Sat Apr 02, 2011 10:22 am ] |
| Post subject: | |
Quote: What kind of supercharger is it, and are there details anywhere on the build? Thanks!
The /6 Procharger kit was from the Super Charger Store.Heres a little info on the engine build. 225 bored and stroked to 262 cubes 440 billet main caps Carrillo rods Ross pistons Crower camshaft T&D adjustable roller rockers Ported head with 2.02"int/1.55"exh valves Manley Bee Hive valve springs Custom SS header Aluminum sheet metal intake manifold Procharger D1SC F.A.S.T fuel injection system Thats all I can think of off the top of my head. |
|
| Author: | Hemidup [ Sat Apr 02, 2011 10:31 am ] |
| Post subject: | |
Quote: Hemidup,
We really want to get this car entered in a /6 race. That was Steve's main goal when he pulled the trigger on this project, but Steve's going to need lots more seat time or he'll be easy pickin's in the first round. I know he's got a bunch of track dates penciled in his calander.
Thanks so much for your input, both on building the engine, and on reporting its progress. Glad to hear you are working the bugs out. Hope I can see this car in person on some future visit to the Twin Cities, or maybe at a Slant 6 race?? Congrats on the best engine trophy!! All the best, Lou |
|
| Author: | sandy in BC [ Sat Apr 02, 2011 10:59 am ] |
| Post subject: | |
Quote: head with 2.02"int/1.55"exh valves
Really!?
|
|
| Author: | polkat [ Sat Apr 02, 2011 12:15 pm ] |
| Post subject: | |
The 2.02" intake surprises me. Extensive head work? ________ Colorado Marijuana Dispensaries |
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|