G'day,

Hoping someone can help me out.

Would like to fit one of the Aussie designed and made ICE ignition systems to my slant six. I have spoken to them and they are about a month away from a billet distributor to suit the hemi 245/265 six and they can easily enough convert to suit the slant, but they believe clearance issues due to size of the billet distributor and may foul on gaurd or chassis rail.

This will occur more so on a AP6 or VC, but they're not sure about the VF as they have a bit more room.

As my block is out and body being prepped, I need the measurement from the collar were the distributor fits in to the inner gaurd or chassis rail.

Not sure if the US 68 or 69 Dart would be same as they use our VE sheetmetal.

If anyone can provide this info it would be greatly appreciated.


Thanks John.

_________________
69 Valiant VF Hardtop

You might be better off asking this question over at Mopar Market mate.

http://www.moparmarketforum.com/forum/index.php

_________________
62 Valiant, 225cid Slant 6/PB 904 with lots of good bits

http://www.moparmarket.com/readersrides ... user=SV162

Thanks for the response. I'll see how I go over there.


Cheers.

_________________
69 Valiant VF Hardtop