| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 81- newer head valve cover https://www.slantsix.org/forum/viewtopic.php?t=43821 |
Page 1 of 1 |
| Author: | ply/six [ Mon Feb 28, 2011 4:23 pm ] |
| Post subject: | 81- newer head valve cover |
A couple of questions. 1- are there any differences in the heads other than the holes for the lifters and the cover. 2-does anyone make a finned cover for this head. 3- I know ,it's more than a couple. has anyone cc'd these heads with 0.100 thou removed. Thanks for now. Barry |
|
| Author: | 1974duster kev [ Mon Feb 28, 2011 4:38 pm ] |
| Post subject: | |
I think my head was 43cc after a .100 cut if i remeber correctly someone will chime in and say if thats correct. I don't have a finned cover its cheap ebay chrome one i just put finned grommets under my breathers there some part # for a oil seperating breather somewhere on the site. Kev |
|
| Author: | ply/six [ Mon Feb 28, 2011 5:40 pm ] |
| Post subject: | head |
Thanks Kev, I'm going to cc the headsoon and this gives me starting point. |
|
| Author: | ply/six [ Mon Feb 28, 2011 5:47 pm ] |
| Post subject: | |
wow, i'd better use the spell check next time... sorry about that |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|