Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Jun 25, 2026 5:21 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Door hinge roller
PostPosted: Tue Mar 22, 2011 4:09 am 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9359
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Does anyone know where you can buy the door hinge roller for a 65 valiant? And the seal? Mine are in pretty rough shape.

Thanks,
Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Last edited by Rick Covalt on Thu Mar 31, 2011 12:45 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Tue Mar 22, 2011 4:55 am 
Offline
Turbo Slant 6
User avatar

Joined: Sun Nov 05, 2006 12:27 am
Posts: 536
Location: Rawson,Australia
Car Model:
Hello Rick,
All the various bits for the hinges are available here in Australia. See HERE
Hope this helps.

regards,Rod :D


Top
   
 Post subject: Thanks
PostPosted: Tue Mar 22, 2011 1:39 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9359
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Thanks, Anyone know if we got them here in the states?

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
 Post subject:
PostPosted: Tue Mar 22, 2011 1:56 pm 
Offline
Guru
User avatar

Joined: Mon Oct 14, 2002 4:32 pm
Posts: 4880
Location: Working in Silicon Valley, USA
Car Model:
I have a box-full of decent used ones... (right side assemblies are not as worn)
DD


Top
   
 Post subject: Pm
PostPosted: Tue Mar 22, 2011 6:03 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9359
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
PM sent doc

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
 Post subject:
PostPosted: Tue Mar 29, 2011 6:54 am 
Offline
1 BBL (New)

Joined: Thu Mar 17, 2011 6:16 am
Posts: 1
Location: Amarillo
Car Model:
Hi there,

Any of the things you're considering might work for a while or partially, but considering the damage that can happen if a garage door comes apart in the raised position I'd suggest calling a repairman.

The good news is that unless you get all fancy the actual door doesn't cost a whole lot - it's the motor and the rest of it that are the big expense. The bad news is that you're probably not going to be able to replace just one panel and have it look decent.

Thanks and regards,
- Esiquil Lara.

_________________
Esiquil Lara


Top
   
 Post subject:
PostPosted: Tue Mar 29, 2011 7:01 am 
Offline
TBI Slant 6
User avatar

Joined: Sat Jul 22, 2006 12:50 am
Posts: 243
Location: Central Valley, California
Car Model:
:? :?

_________________
Image
Super Six Conversion Stromberg


Top
   
 Post subject: ??
PostPosted: Tue Mar 29, 2011 1:32 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 9359
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Quote:
Any of the things you're considering might work for a while or partially, but considering the damage that can happen if a garage door comes apart in the raised position I'd suggest calling a repairman.

The good news is that unless you get all fancy the actual door doesn't cost a whole lot - it's the motor and the rest of it that are the big expense. The bad news is that you're probably not going to be able to replace just one panel and have it look decent.
:? :? I am talking about a car door not a garage door.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited