D'OH! MICHIGAN, not MAINE! Sorry.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Fender Vs. Fence . . . https://www.slantsix.org/forum/viewtopic.php?t=44510 |
Page 1 of 1 |
| Author: | D-Ram 1596 [ Wed Apr 13, 2011 1:36 pm ] |
| Post subject: | Fender Vs. Fence . . . |
Well my D-150 sits for most of the winter since except for when I am back home from school on break. Of course I took it out over christmas and slid on ice right in to a Homeland Security iron fence ( lucky I didn't get shot! ) Anywho, has anyone on her ever disassembled the front end of one of the D/W-series, and does anyone really know of a good place to find a fender? 80s dodges around me are VERY hard to find. |
|
| Author: | Reed [ Wed Apr 13, 2011 2:21 pm ] |
| Post subject: | |
www.millsupply.com $117 for a brand new 81-93 Dodge pickup and Ramcharger fender. Check eBay for a factory service manual for your rig. Shouldn't be too expensive. The FSM will tell you how to take the fender off. |
|
| Author: | bbbbbb9 [ Wed Apr 13, 2011 2:22 pm ] |
| Post subject: | |
?Homeland Security fence in the UP? Are we worried about Moose or Canucks? (I grew up in Michigan, sorry to hijack) |
|
| Author: | D-Ram 1596 [ Fri Apr 15, 2011 9:51 am ] |
| Post subject: | |
I found them on ebay and rockauto, but I really don't want to pay $60 extra for freight shipping on a 20Lb piece of sheet metal. I will have to keep poking around and find a parts truck, or possibly a replacement truck. Quote: ?Homeland Security fence in the UP? Are we worried about Moose or Canucks? (I grew up in Michigan, sorry to hijack)
I am from Sault Ste. Marie and I hit a fence around the Soo Locks, which is a US Army Corps of Engineers Facility, with full security. Then there is a Border Patrol office, a HUGE Customs/border Station along with a recently built I.C.E. building. The Patriot act beefed up security at both borders . . . a lot up here.
|
|
| Author: | SlantSixDan [ Fri Apr 15, 2011 10:58 am ] |
| Post subject: | |
Quote: I found them on ebay and rockauto, but I really don't want to pay $60 extra for freight shipping on a 20Lb piece of sheet metal
But...you live in the U.P., eh!
|
|
| Author: | bbbbbb9 [ Fri Apr 15, 2011 11:53 am ] |
| Post subject: | |
Quote: I found them on ebay and rockauto, but I really don't want to pay $60 extra for freight shipping on a 20Lb piece of sheet metal. I will have to keep poking around and find a parts truck, or possibly a replacement truck.
Interesting. Last time I was at the locks it was probably 1973
Quote: ?Homeland Security fence in the UP? Are we worried about Moose or Canucks? (I grew up in Michigan, sorry to hijack)
I am from Sault Ste. Marie and the Soo Lock is a US Army Corps of Engineers Facility, with full security, and there is Border Patrol office, a HUGE Customs/border Station along with a recently built I.C.E. building. The Patriot act beefed up security at both borders . . . a lot up here. |
|
| Author: | Reed [ Fri Apr 15, 2011 12:07 pm ] |
| Post subject: | |
91 Dodge truck being parted in Bangor: http://maine.craigslist.org/pts/2306671398.html |
|
| Author: | Reed [ Fri Apr 15, 2011 1:35 pm ] |
| Post subject: | |
D'OH! MICHIGAN, not MAINE! Sorry.
|
|
| Author: | D-Ram 1596 [ Sat Apr 16, 2011 6:32 am ] |
| Post subject: | |
Quote: D'OH! MICHIGAN, not MAINE! Sorry.
I was wondering about that. Quote: But...you live in the U.P., eh!
I see what you did there DanAnywho, I can't do anything for a couple weeks untill this semester is done (and I find a job). |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|