| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Instructions for NOS Carb https://www.slantsix.org/forum/viewtopic.php?t=44595 |
Page 1 of 1 |
| Author: | 65Dodge100 [ Mon Apr 18, 2011 1:33 am ] |
| Post subject: | Instructions for NOS Carb |
I bought a NOS 2bbl a couple of years ago and I'm thinking the advice at the time was to take it apart and put a Carb kit in it? Does that sound correct to anyone or maybe you can tell me why? Sure I took notes but who thinks to write that down... Danny |
|
| Author: | wjajr [ Mon Apr 18, 2011 4:58 am ] |
| Post subject: | |
Yes, rebuild is what one dose to a New Old Stock carburetor. That unused baby has been sitting somewhere on a shelf for years and years, and all the soft parts have dried, and gaskets shrunk. So freshening up those items with 2011 parts will make it a new carburetor. |
|
| Author: | 65Dodge100 [ Mon Apr 18, 2011 8:45 am ] |
| Post subject: | |
Quote: Yes, rebuild is what one dose to a New Old Stock carburetor. That unused baby has been sitting somewhere on a shelf for years and years, and all the soft parts have dried, and gaskets shrunk. So freshening up those items with 2011 parts will make it a new carburetor.
Thanks Wjajr, (Wm right?) I was thinking that was the reason and the rhyme but wasn't sure.Danny |
|
| Author: | BUCKET 636 [ Wed Apr 20, 2011 2:21 pm ] |
| Post subject: | |
I have just put a kit in my NOS Holley 2280.I was getting a bog off idle. When i took the carb apart,the plunger stem rubber had actually gone really soft and looked about 2 mm bigger than the replacement. I'm thinking it might have actually been folding back on itself on the downward stroke . Put a new rubber and gaskets in,wallah,sweet as. No bog now. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|