| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 2 PCV Valves https://www.slantsix.org/forum/viewtopic.php?t=44679 |
Page 1 of 1 |
| Author: | 61 V200 [ Sat Apr 23, 2011 8:26 am ] |
| Post subject: | 2 PCV Valves |
While putting the final touches on my super 6 set up yesterday I recalled a thread about PCV valves where SSD mentioned a plastic one that fits into the rear breather cap for early model years. I saw that my cap had a metal elbow, pulled it and sure enough, PCV valve in the cap. Rattled it up and down...seems ok? So I will delete the one that someone had installed downstream. Sure will make the hook-up to the carb port a lot cleaner. My limited knowledge tells me performance should not have been affected by having 2 valves. What say ye? |
|
| Author: | SlantSixDan [ Sat Apr 23, 2011 9:15 am ] |
| Post subject: | |
Probably no big deal, but it's best to have just one. Clean it with spray carb cleaner. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|