This year at clay city I ran my 75 dart sport with a 59 Edsel rear in it. The great thing is that it bolted in was the same width and is a 9 inch ford which has about any gear ratio you want at the junk yard. I'm not sure but i'd say late 50's and early 60's ford rears are the same. The drive shaft even worked with a 319 u joint from NAPA bolt in all the way the parking brake cables even hooked up. Just thought you would like to know.

_________________
Slow ride take it easy
Building something special

if you ever want to get rid of that rear end let me know! ford 8" rears out of a granda will fit an a-body too. for more info on ford 8 and 9" rear ends, check out the links below.

http://66.96.130.106/archives/2002/02/n ... dex2.shtml

http://www.kevinstang.com/Ninecase.htm

http://dfwmotorsport.com/Fairlane/9inchrearends.htm

http://ultrastang.com/Rearinfo.asp?Page_ID=1

I have an 8 inch out of a 68 stang nut but shipping would kill you.

_________________
Slow ride take it easy
Building something special

im sure shipping wouldnt be cheap . what kinda gears does it have? just wondering.

this one has 3.00 I think that is about normal.

im going to get a 8.25 out of a 75 Dart with a sure grip and 3.23s for 100$ , but i gotta ship it here. might as well keep it all mopar! now i need some 4.10's for it once i get it.

I would too I just couldnt ever find a good 8.25 here all the mopars are gone. I'm happy for you.

_________________
Slow ride take it easy
Building something special