Slant Six Forum
https://www.slantsix.org/forum/

Wheel stud size, '64 Valiant
https://www.slantsix.org/forum/viewtopic.php?t=46107		 Page 1 of 1
Author:  Slantin' Six [ Thu Aug 25, 2011 10:10 pm ]
Post subject:  Wheel stud size, '64 Valiant
I have a '64 Plymouth Valiant 4-door. I need to know the wheel stud size to purchase new studs for the car. Also if you know where to purchase them please provide a link.

Thanks!
Author:  Dart270 [ Fri Aug 26, 2011 4:36 am ]
Post subject: 
Stock size is 7/16" fine thread.

Lou
Author:  slantvaliant [ Fri Aug 26, 2011 5:28 am ]
Post subject: 
Stock studs were also left-hand thread on the left side of the car. This is lost on most of the tire techs these days - they often don't know to look for the "L" stamped on the end.
If you're replacing lugs, you might consider going to all right-hand threads for standardization.
Also, if you're replacing some of them, I suggest replacing all of them. They're closing in on 50 years of service.

ROCK AUTO has the right-hand studs.

By the way, welcome to the board! And congratulations on having the prettiest year Valiant they ever made! :wink:
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/