| Slant Six Forum https://www.slantsix.org/forum/ |
|
| FSM's for trucks question https://www.slantsix.org/forum/viewtopic.php?t=47092 |
Page 1 of 1 |
| Author: | supton [ Fri Nov 25, 2011 1:48 pm ] |
| Post subject: | FSM's for trucks question |
I haven't bought my truck yet; still on the fence. I suspect it'll be mid 80's for a number of reasons. Anyhow, my question is, if I buy an FSM for say '86 will it basically cover 85-87? I know there are subtle changes year to year, and that I'll always be well-advised to by the FSM for the year in question. But for the mid-80's, aren't all these trucks really, really similar? I can only think of the Leanburn move from the air cleaner housing to the fender, and maybe the 6145 feedback carb (CA emissions, unlikely to be found on this coast--and unlikely to still be installed at this date). |
|
| Author: | Reed [ Fri Nov 25, 2011 1:50 pm ] |
| Post subject: | |
Yes, they are more or less the same. However, lean-burn did have minor changes from year to year, so you would be best served to get the truck then get the factory service manual for that specific year. |
|
| Author: | supton [ Fri Nov 25, 2011 2:03 pm ] |
| Post subject: | |
Alright, I'll hold off on buying the CD--for now. And see if I can score a lower cost print one of, well, any model. There's a bunch of bits I'm not familiar with, and I just want to flip through one. Thanks. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|