| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Turbo Torque Converter https://www.slantsix.org/forum/viewtopic.php?t=47281 |
Page 1 of 1 |
| Author: | stop the beast [ Tue Dec 13, 2011 9:07 pm ] |
| Post subject: | Turbo Torque Converter |
Hi All, I'm looking to have a '71 904 re-done for my boosted /6 setup and I'm shopping tq converters but not exactly sure what I'm looking to find. I'm going to be running a smaller gt32 turbo at less than a bar. I'm thinking it should begin to spool very rapidly and I'll only need a stall around 1800-2100rpm behind my /6. Could anyone recommend a good brand or model? I'm thinking a 9.5" or 10" will be the size I should need. Thanks. |
|
| Author: | Dart270 [ Wed Dec 14, 2011 4:15 am ] |
| Post subject: | |
Sounds like a stock converter to me... Lou |
|
| Author: | stop the beast [ Wed Dec 14, 2011 11:52 am ] |
| Post subject: | |
Quote: Sounds like a stock converter to me...
Yeah, I've seen a lot of the turbo guys using stocks. Anyone make a better stock replacement than the next?
Lou |
|
| Author: | red79 [ Wed Dec 14, 2011 12:56 pm ] |
| Post subject: | |
Your friendly local Chrysler dealer should be able to hook you up with a stock 904 coverter no sweat. |
|
| Author: | Dart270 [ Thu Dec 15, 2011 12:19 pm ] |
| Post subject: | |
Main thing is to get a strong pump drive hub. I don't know about stock replacements. I might order a HD replacement from a place like Midwest Converters. You can always try a stocker and see how it holds up... I have a pile of them here. Lou |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|