Hi All,

I'm looking to have a '71 904 re-done for my boosted /6 setup and I'm shopping tq converters but not exactly sure what I'm looking to find.

I'm going to be running a smaller gt32 turbo at less than a bar. I'm thinking it should begin to spool very rapidly and I'll only need a stall around 1800-2100rpm behind my /6.

Could anyone recommend a good brand or model? I'm thinking a 9.5" or 10" will be the size I should need.

Thanks.

_________________
Tony Bracamonte
'66 Dart GT
built /6 w/ garrett gt32
air-air intercooler
330 hp / 440 lbft @ 16.5 psi

Sounds like a stock converter to me...

Lou

_________________
Home of Slant6-powered fun machines since 1988

Yeah, I've seen a lot of the turbo guys using stocks. Anyone make a better stock replacement than the next?

_________________
Tony Bracamonte
'66 Dart GT
built /6 w/ garrett gt32
air-air intercooler
330 hp / 440 lbft @ 16.5 psi

Your friendly local Chrysler dealer should be able to hook you up with a stock 904 coverter no sweat.

Main thing is to get a strong pump drive hub. I don't know about stock replacements. I might order a HD replacement from a place like Midwest Converters. You can always try a stocker and see how it holds up... I have a pile of them here.

Lou

_________________
Home of Slant6-powered fun machines since 1988