What does everyone prefer? Beside ceramic coating
I dont have that kind of money. Im looking into VHT header paint,but I cant find a primer for it. Does VHT not need a primer?
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Header paint? https://www.slantsix.org/forum/viewtopic.php?t=47691 |
Page 1 of 1 |
| Author: | raPoM [ Mon Jan 23, 2012 6:15 pm ] |
| Post subject: | Header paint? |
What does everyone prefer? Beside ceramic coating I dont have that kind of money. Im looking into VHT header paint,but I cant find a primer for it. Does VHT not need a primer?
|
|
| Author: | hantayo13 [ Mon Jan 23, 2012 6:39 pm ] |
| Post subject: | |
I use hi temp bbq paint ...VHT is good also.... no primer...will last longer if you paint inside also....do a couple just get it hot and cool down,will last a bit longer before burning off, and it will burn off in time |
|
| Author: | raPoM [ Mon Jan 23, 2012 6:41 pm ] |
| Post subject: | |
Thanks 
|
|
| Author: | Danarchy [ Mon Jan 23, 2012 7:00 pm ] |
| Post subject: | |
unless you are going Jet-Hot don't waste your money, just buy some Krylon 1200. |
|
| Author: | kielbasa [ Mon Jan 23, 2012 10:31 pm ] |
| Post subject: | |
i have experience with the VHT flame proof paint. yes there is a primer, each can is like 10-11 bucks. i used it on my VW header. it holds up bitchen, especially for a rattle can. prep is very important. make sure its very clean. then use the primer. you have to cure it, i used my bbq, since vw headers disassemble in 4 smaller pieces. you cure it 3 times at 3 different temperatures, then you do the same for the actual paint. just follow instructions i painted my vw header about 6 years ago, it use to be black, but now is a kinda grayish, but isn't any bit of surface rust, and isn't flakey |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|