| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Some rebuild tips please? https://www.slantsix.org/forum/viewtopic.php?t=47783 |
Page 1 of 1 |
| Author: | /6Vanner [ Tue Jan 31, 2012 5:43 pm ] |
| Post subject: | Some rebuild tips please? |
Ok, ill be short and sweet- heres what i need. crank journal measurements and con-rod journal measurements-stock bore diameter-stock i gotta measure everything out to see how worn out it is before i take it to the machine shop. Hoping everything is within reasonable specs. I searched a little for these but couldnt find anything without searching through hundreds of pages of info. Thanks in advance guys! |
|
| Author: | Doc [ Tue Jan 31, 2012 5:58 pm ] |
| Post subject: | |
Mains @ 2.750 Rods at 2.187 Cylinder Bore @ 3.400 DD |
|
| Author: | /6Vanner [ Tue Jan 31, 2012 9:31 pm ] |
| Post subject: | |
Thank you doc, that works perfect. |
|
| Author: | /6Vanner [ Wed Feb 01, 2012 1:57 pm ] |
| Post subject: | |
hevent measured the mains or the cylinders yet, but the rod journals measure 2.114. so they are worn close to .070..... time for a new crank i think. S&*t. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|