| Slant Six Forum https://www.slantsix.org/forum/ |
|
| clutch style sure grip 7 1/4 https://www.slantsix.org/forum/viewtopic.php?t=48068 |
Page 1 of 1 |
| Author: | Valleyant [ Fri Mar 02, 2012 3:35 pm ] |
| Post subject: | clutch style sure grip 7 1/4 |
Are rebuild parts/ service parts readily available for these? I don't want to upgrade this car to anything more than the 7 1/4 rear that is in it now but would like to find a sure grip for it. It's a daily driver and will have maybe 130 wheel horsepower with the mild head work and upgrade to super six. |
|
| Author: | Doc [ Fri Mar 02, 2012 4:14 pm ] |
| Post subject: | |
As far as I know, service parts are not available for the 7 1/4 SureGrip units. DD |
|
| Author: | Charrlie_S [ Sat Mar 03, 2012 5:12 am ] |
| Post subject: | |
Like Doc says. The only way to find SG parts, is if someone has them on the shelf somewhere. The last set of clutches I ran into, the seller wanted around $150. I passed on those. I do have a spare set, but not for sale at this time, as I do run a 7 1/4 SG rear in one of my race cars. Maybe someday. PS: there are two different style SG units for the 7 1/4. The early clutch style with 4 spider gears, and the later "cone" style with only 2 spider gears. |
|
| Author: | Valleyant [ Sun Mar 04, 2012 12:54 pm ] |
| Post subject: | |
Thankyou guys! Charlie, which is better? |
|
| Author: | Doctor Dodge [ Sun Mar 04, 2012 4:50 pm ] |
| Post subject: | |
The clutch style is better. DD |
|
| Author: | terrylittlejohn [ Sun Mar 04, 2012 5:10 pm ] |
| Post subject: | |
if it is the cone type non rebuildable,they can be fixed |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|