| Slant Six Forum https://www.slantsix.org/forum/ |
|
| engine swap from an auto to a stick https://www.slantsix.org/forum/viewtopic.php?t=4993 |
Page 1 of 1 |
| Author: | chimpo13 [ Tue Feb 11, 2003 10:35 am ] |
| Post subject: | engine swap from an auto to a stick |
Howdy, Is there any problems with swapping a /6 from an auto to a stick? I've got a 1962 Valiant wagon stick with a dead engine. And I've got an engine sitting around from a 68/69 Dart. Only the Dart engine is hooked up to an 904. Is it just a straight swap? I was thinking there was something about changing flywheels, but I can't remember. --Dave |
|
| Author: | Doc [ Tue Feb 11, 2003 11:29 am ] |
| Post subject: | 68 SL6 Engine in a 62 |
To get the "later" 68 engine into the 62 you will need to use the 62's oil pan and pick-up tube and you will need the larger hole flywheel. Your 62 should have the gear reduction starter, if it does not (60 & 61 had a direct drive starter) then you will need the more common gear reduction starter to go with that 68 and newer flywheel. DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|