170!?
Who in their right mind would even bother putting headers on a 170?
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Prototype 170 long tube headers https://www.slantsix.org/forum/viewtopic.php?t=50029 |
Page 1 of 3 |
| Author: | Charrlie_S [ Wed Oct 10, 2012 6:50 am ] |
| Post subject: | Prototype 170 long tube headers |
Prototype long tube 170 headers I will try to get a pic posted. They are slightly modified copies of the old Clifford items. |
|
| Author: | Greg Ondayko [ Wed Oct 10, 2012 7:24 am ] |
| Post subject: | |
Charrlie, The link is password protected. Greg |
|
| Author: | Charrlie_S [ Wed Oct 10, 2012 8:48 am ] |
| Post subject: | |
I'll see what I can do, about moving the pics. |
|
| Author: | Rob Simmons [ Wed Oct 10, 2012 10:00 am ] |
| Post subject: | |
170!? Who in their right mind would even bother putting headers on a 170?
|
|
| Author: | Charrlie_S [ Wed Oct 10, 2012 11:03 am ] |
| Post subject: | |
Who in their right mind races any slant six? |
|
| Author: | Greg Ondayko [ Wed Oct 10, 2012 11:53 am ] |
| Post subject: | |
ohh oh ooooh I do..  Greg |
|
| Author: | sandy in BC [ Wed Oct 10, 2012 12:47 pm ] |
| Post subject: | |
LMAO!....Greg thinks he is his right mind! Who in their right mind (or left mind) even comes to this board? |
|
| Author: | valiant200kid [ Wed Oct 10, 2012 10:13 pm ] |
| Post subject: | |
all of us 
|
|
| Author: | hantayo13 [ Thu Oct 11, 2012 6:43 am ] |
| Post subject: | |
a set of headers ought to take atleast 1/2 sec of et in that there cuda eh charlie |
|
| Author: | Greg Ondayko [ Thu Oct 11, 2012 8:23 am ] |
| Post subject: | |
Quote: all of us
You are from Boonsboro Huh.. Then I hope to see you Here: http://www.slantsix.org/forum/viewtopic.php?t=49342 Greg |
|
| Author: | Rick Covalt [ Fri Oct 12, 2012 7:15 am ] |
| Post subject: | Picture |
Here is the picture of the prototype. looks good!   Front header view  Rear header view |
|
| Author: | Romeo Furio [ Fri Oct 12, 2012 7:34 am ] |
| Post subject: | |
Most will ask the question WHY ? I say WHY NOT ! They call it SLANT SICKNESS for a reason.................... |
|
| Author: | Greg Ondayko [ Fri Oct 12, 2012 8:30 am ] |
| Post subject: | |
Quote: Most will ask the question WHY ? I say WHY NOT ! Thet call it SLANT SICKNESS for a reason....................
oh yeah I forgot to tell everyone last time I had a tetanus shot I was 2 .... That's why I race ruster.. I have the Sickness!  Greg |
|
| Author: | 66aCUDA [ Fri Oct 12, 2012 9:25 am ] |
| Post subject: | |
So you FINALLY got Mark to make a set huh? Im REALLY glad we needed them. Frank |
|
| Author: | Charrlie_S [ Fri Oct 12, 2012 9:32 am ] |
| Post subject: | |
Trying to stir up some interest. Mark has invested a lot. These are for a 60-66 "A" body with a 170. They should fit, with a stock intake, Clifford, Offie, and the Aussie Speed Hurricane. They still need to be test fitted, on a car. Trying to work out something with Mark, at Aussie Speed, as the 170 was not available over there. If everything works out OK, it would probably be better as a group buy, since shipping one at a time from Australia, is pretty pricey. |
|
| Page 1 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|