| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Magnecor leads https://www.slantsix.org/forum/viewtopic.php?t=50216 |
Page 1 of 1 |
| Author: | SlantSteve [ Tue Oct 30, 2012 2:33 am ] |
| Post subject: | Magnecor leads |
Hi guys, I'm just completing the hei conversion at the moment and was about to order a set of Magnecor leads ..... What type has been used ? The 7 mm cable or are the KV85 cables the choice? The engine is basically a rebuilt mild street only engine. Thanks |
|
| Author: | Greg Ondayko [ Tue Oct 30, 2012 7:22 am ] |
| Post subject: | |
I used those wires on my race car project.. Been raing for 3 years now.. Bulletproof.. I believe I used the Larger ones but for a mild street Build the smaller dia. would be good as well. Greg |
|
| Author: | wjajr [ Tue Oct 30, 2012 11:22 am ] |
| Post subject: | |
I installed the 8mm wires this spring, no more electrifying moments during timing adjustments… Nice thick high quality insulation & boots. |
|
| Author: | SlantSteve [ Thu Nov 01, 2012 5:30 am ] |
| Post subject: | |
Thanks for the replies guys,I ended up going with the 7 mm leads, they were the only black wires Magnecor had in stock here in Australia and was told they are fine for my needs. Thanks! Steve |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|