Hi guys. The purpose of this was to let you guys see my current project on my duster. Right now I'm installing the EDIS system with megajolt. In the future I plan to use Megasquirt.
The following pictures are the install of the trigger wheel.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| EDIS install https://www.slantsix.org/forum/viewtopic.php?t=50684 |
Page 1 of 1 |
| Author: | jacmifish [ Mon Dec 31, 2012 6:03 pm ] |
| Post subject: | EDIS install |
Hi guys. The purpose of this was to let you guys see my current project on my duster. Right now I'm installing the EDIS system with megajolt. In the future I plan to use Megasquirt. The following pictures are the install of the trigger wheel.
|
|
| Author: | jacmifish [ Wed Jan 02, 2013 3:32 pm ] |
| Post subject: | VR sensor bracket |
This bracket will hold the VR sensor. Used an L bracket and bent, cut and welded it with sleeves for bolts. Mocked this all on a spare motor. Please excuse my welding  Just applied some coating because I'll be back at school. 
|
|
| Author: | jacmifish [ Mon Feb 25, 2013 10:30 am ] |
| Post subject: | Up and running |
Alright so I had a chance to come back down from school and wire things up. Put everything in their mocked up locations and it cranked right up =) . I didn't run it for long because of no radiator attached. Sorry no pictures I forgot. Next time I'll try running a proper advance map and take some pictures. |
|
| Author: | Greg Ondayko [ Tue Feb 26, 2013 8:07 am ] |
| Post subject: | |
Nice work. I think this belongs in in the EFI section - Mainly because Mega Jolt is an offshoot of the Megasquirt EFI controller. I have wanted to do this upgrade for quite a while.. I have all the parts just not the time yet.  Greg |
|
| Author: | jacmifish [ Tue Feb 26, 2013 11:06 am ] |
| Post subject: | |
Whoops  when I get everything correct I will make another post there. Thanks! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|