Slant Six Forum
https://www.slantsix.org/forum/

eng bracketry 225, 1969?
https://www.slantsix.org/forum/viewtopic.php?t=50724
Page 1 of 2

Author:  slant6 [ Sun Jan 06, 2013 4:50 pm ]
Post subject:  eng bracketry 225, 1969?

I need a picture of the brackets that attach to the block so I can attach my eng mts? TiA, Dana[/i]

Author:  Reed [ Mon Jan 07, 2013 12:46 pm ]
Post subject: 

Do you just need pictures of where the motor mounts attach or do you need to know how all the brackets mount?

Author:  slant6 [ Mon Jan 07, 2013 5:22 pm ]
Post subject:  mts

Yes, pictures of how they look attached from block bracketry to rubber eng mt. Thank you, Dana

Author:  Danarchy [ Mon Jan 07, 2013 5:24 pm ]
Post subject: 

what year did they change to a spool type mount? would a 1969 be the same as 1964? if so,I have an extra set.

Author:  Danarchy [ Mon Jan 07, 2013 5:36 pm ]
Post subject: 

Image
passengers side USA (mount removed, but thats where it bolts in. elusive and hard to photograph in car.)

Image
drivers side USA

Author:  DusterIdiot [ Mon Jan 07, 2013 6:40 pm ]
Post subject:  Comment on removed mount picture...

The mount on the passenger side is a flat-ish channel with the rubber toward the top of the engine so the engine leans in that direction.


-D.Idiot

Author:  slant6 [ Tue Jan 08, 2013 3:26 pm ]
Post subject:  mts

Drivers side helps but other side I need help to see what it looks like also. If anyone has both sides I am interested, send pic first. Thanks for all of u guy's help, Dana

Author:  Fopar [ Tue Jan 08, 2013 3:36 pm ]
Post subject: 

As duster idiot said the passengers side mounts with the ears the rubber bolts to is toward the top of the motor.

Richard

Author:  slant6 [ Tue Jan 08, 2013 6:06 pm ]
Post subject: 

#2264 and 2265 should be the correct mts to buy to attach to my block bracketry, correct?

Author:  Fopar [ Tue Jan 08, 2013 6:19 pm ]
Post subject: 

Where did you get those numbers?
#2264 and 2265


Richard

Author:  DusterIdiot [ Tue Jan 08, 2013 6:58 pm ]
Post subject:  I have...

A set of 1970 Dart brackets with Rubber in good shape I'd sell $25+ shipping...

-D.Idiot

Author:  slant6 [ Tue Jan 08, 2013 8:10 pm ]
Post subject:  mts

Richard, e-bay, 2 different sources, but they are only the engine mt (rubber with studs)[/i]

Author:  slant6 [ Tue Jan 08, 2013 8:12 pm ]
Post subject:  mts

D idiot, send pic of what u r trying to sell, thanks, Dana

Author:  Danarchy [ Wed Jan 09, 2013 7:50 am ]
Post subject: 

Quote:
what year did they change to a spool type mount?
Dana-I will get you a picture of the passenger side mount this evening.

Author:  slant6 [ Wed Jan 09, 2013 1:30 pm ]
Post subject:  mts

Great, thanks[/b]

Page 1 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/